Skip to Main Content

Incentives

For Lighting Program

2021 Business Lighting Standard Incentives

Only enrolled Energy Trust Business Lighting trade allies* may offer incentives to their customers for qualifying lighting projects.

Before submitting 2021 projects for incentives, Business Lighting trade allies must finalize their enrollment status by reviewing and signing the Program Guide via DocuSign. If you have questions about your enrollment status, please email lighting@energytrust.org or call 1.800.326.2917.

Additional measure requirements may apply and are outlined in Form 190L.

Equipment General RequirementsIncentive 
LED directional/reflector lamp with integral driverLess than 20W
40% min. wattage reduction
$6 per lamp, up to 40% of eligible measure cost 
20W or greater
40% min. wattage reduction
$9 per lamp,
up to 40% of eligible measure cost
LED decorative lampScrew-base candelabra lamp or globe screw-in lamp
40% min. wattage reduction
$3 per lamp,
up to 40% of eligible measure cost
LED omni-directional lamp A-Lamp or similar, replacing 150W or less
40% min. wattage reduction
$3 per lamp,
up to 40% of eligible measure cost

Pin base LED lamp
Pin-CFL to pin base LED, with new or existing ballast
40% min. wattage reduction
$1.50 per lamp,
up to 40% of eligible measure cost
CFL to pin base LED, at line voltage or with remote driver
40% min. wattage reduction
$1.50 per lamp, up to 40% of eligible measure cost 
HID to LED screw-in lamp (retrofit)40W or less
50% min. wattage reduction
$15 per lamp,
up to 40% of eligible measure cost
41W-100W
50% min. wattage reduction
$30 per lamp,
up to 40% of eligible measure cost
101W-160W
50% min. wattage reduction
$40 per lamp,
up to 40% of eligible measure cost
161W or greater
50% min. wattage reduction
$45 per lamp,
up to 40% of eligible measure cost
TLEDsRetrofit, replacing any existing technology, removing existing ballast, replacing with new T8 or T5 ballast, line voltage TLED, or dedicated driver TLED,
40% min. wattage reduction
$0.60 per linear foot,
up to 40% of eligible measure cost
Relamp, T8 or T5 diameter TLED replacing existing fluorescent, operating on existing ballast,
40% min. wattage reduction
$0.30 per linear foot,
up to 40% of eligible measure cost
Interior LED fixturesInterior recessed canister downlight
LED kit or new LED fixture replacing any existing technology
40% min. wattage reduction
$12 per fixture,
up to 40% of eligible measure cost
LED fixture or kit, 25W or less
40% min. wattage reduction
$25 per fixture,
up to 40% of eligible measure cost
LED fixture or kit, 26-57W
40% min. wattage reduction
$40 per fixture,
up to 40% of eligible measure cost
LED fixture or kit, 58-100W
40% min. wattage reduction
$45 per fixture,
up to 40% of eligible measure cost
LED high-bay / low-bay fixtures 40-90W
40% min. wattage reduction
$75 per fixture,
up to 40% of eligible measure cost
91-140W
40% min. wattage reduction
$115 per fixture,
up to 40% of eligible measure cost
141-299W
40% min. wattage reduction
$125 per fixture,
up to 40% of eligible measure cost
300W or greater
40% min. wattage reduction
$175 per fixture,
up to 40% of eligible measure cost
Exterior LED fixtures Exterior recessed canister downlight
LED kit or new LED fixture replacing any existing technology
40% min. wattage reduction
$12 per fixture,
up to 40% of eligible measure cost
20W or less
40% min. wattage reduction
$30 per fixture,
up to 40% of eligible measure cost
21-40W
40% min. wattage reduction
$45 per fixture,
up to 40% of eligible measure cost
41-90W
40% min. wattage reduction
$90 per fixture,
up to 40% of eligible measure cost
91-140W
40% min. wattage reduction
$130 per fixture,
up to 40% of eligible measure cost
141-299W
40% min. wattage reduction
$155 per fixture,
up to 40% of eligible measure cost
300W or greater
40% min. wattage reduction
$235 per fixture,
up to 40% of eligible measure cost
LED cooler/freezer display case lighting Motion sensor, on low power LED cases, side bar (single)$1.60 per linear foot of fixture,
up to 40% of eligible measure cost
Motion sensor, on high power LED cases, mullion bar (double)$2.40 per linear foot of fixture,
up to 40% of eligible measure cost
Single row
T8 or T12 low power LED
(Medium temp case)
Replacing T8 or T12 with LED side bar (single)
$8 per linear foot of fixture,
up to 40% of eligible measure cost
Double row
T8 or T12 high power LED (Medium temp case)
Replace T8 or T12 with LED mullion (double)
$16 per linear foot of fixture,
up to 40% of eligible measure cost
Single row
T12 low power LED (Medium temp case or low temp case)
Replace T12 with LED side bar (single)
$8 per linear foot of fixture,
up to 40% of eligible measure cost
Double row
T8 or T12 high power LED (Medium temp case or low temp case)
Replace T8 or T12 with LED mullion (double)
$16 per linear foot of fixture,
up to 40% of eligible measure cost
Single row
T8 or T12 low power LED (Low temp case)
Replace T8 or T12 with LED side bar (single)
$8 per linear foot of fixture,
up to 40% of eligible measure cost
Double row
T8 or T12 high power LED (Low temp case)
Replace T8 or T12 with LED mullion (double)
$16 per linear foot of fixture,
up to 40% of eligible measure cost
Interior vacancy sensor Manual-on version, wall switch, control loads 30W or greater $30 per sensor,
up to 100% of eligible measure cost
Interior occupancy sensor Automatic-on version, wall switch, control loads 30W or greater $30 per sensor,
up to 100% of eligible measure cost
Fixture mount, control loads 30W or greater$40 per sensor,
up to 100% of eligible measure cost
Wireless, ceiling/corner/ surface (including wall) mount, control loads 100W or greater $60 per sensor,
up to 100% of eligible measure cost
Exterior occupancy sensor Fixture or pole mounted (wired or wireless), control loads 20-39W $19.50 per sensor,
up to 100% of eligible measure cost
Fixture or pole mounted (wired or wireless), control loads 40W or greater $35 per sensor,
up to 100% of eligible measure cost
Custom lighting controls To be eligible, each custom lighting measure must be reviewed and pre-qualified by Energy Trust. $0.20 per annual kWh saved,
up to 40% of eligible measure cost
Custom lighting To be eligible, each custom lighting measure must be reviewed and pre-qualified by Energy Trust$0.15 per annual kWh saved,
up to 40% of eligible measure cost
Custom lighting and controls for grow operationsTo be eligible, each custom lighting measure must be reviewed and pre-qualified by Energy Trust. $0.15 per annual kWh saved,
up to 30% of eligible measure cost

Energy Trust incentives are subject to funding availability and may change.

*Energy Trust will continue allowing contractors to enroll as trade allies, but we will not accept incentive applications from non-trade allies, or directly from customers who are planning to install their own projects.

Do you serve K-12 public schools and other public entities? Speak with your account manager for more information.

Questions?

Give us a call at 1.800.326.2917 or send us an email at lighting@energytrust.org.